View Station Data

ESS.I.100215 Industrial & Commercial Energy Storage System Technical Overview

Core Technical Specifications

ESS.I.100215 Technical Parameters

Battery System Architecture

Component Specification Standard Compliance
Battery Module 51.2V/280Ah/14.33kWh per module GB/T 36276, IEC 62619
Total Configuration 15 modules in series (768V DC system) UN38.3 Transportation
Cycle Life >6,000 cycles @25°C & 0.5C rate UL 1973 Equivalent
Max Continuous Power 100kW (150A @380V 3-phase) IEC 61439-2


Multi-layer Protection Design

  1. Water Detection

    • Immersion sensors trigger automatic disconnection & alarm
    • IP54 cabinet protection against dust/water ingress

  2. Fire Suppression

    • Dual-control aerosol system (thermal + EMS interface)
    • 4x suppression units per cabinet

  3. Thermal Management

    • Industrial air conditioning (-15°C~50°C operation)
    • Passive balancing & temperature/humidity sensors

Application Case Study: Manufacturing Plant Peak Shaving

System Configuration

  • 2 units (430kWh total capacity)
  • Operate Mode: Peak Shaving + Backup Power

Key Parameters

Metric Measurement Data
Daily Peak Reduction 150kW sustained for 2.8 hours
Voltage Stability <1% fluctuation during load switching
Cycle Efficiency 98.2% (AC-AC round trip)


Monitoring & Analysis

  • Real-time Parameters

    • Battery SOC/SOH (State of Health)
    • 3-phase voltage/current unbalance rate
    • Cabinet internal temperature/humidity

  • Data Interface

    Supported Protocols: RS232, RS485, TCP, UDP, CAN, WIFI  
Communication Rate: CAN 2.0B @500kbps

Report Generation

Report Type Key Metrics Included
Energy Consumption Daily/Monthly load profiles
Battery Performance Cycle count, capacity degradation
Cost Analysis TOU tariff savings calculations

Global Standards Compliance

  1. Cell Level

    • UN38.3 transportation certification
    • IEC 62619:2022 safety requirements

  2. System Level

    • IP54 environmental protection
    • CE Low Voltage Directive 2014/35/EU

Site Requirements

Parameter Specification
Cabinet Dimensions 1620mm(W)×1500mm(D)×1900mm(H)
Operating Temperature -15°C~50°C (derating above 45°C)
Grid Connection 3P+N+PE (380VAC ±10%)

Maintenance Features

  • UPS-supported EMS for fault diagnosis during outages
  • Mobile app alerts for:
    • Water intrusion events
    • Battery cluster imbalance >5%

Comparative Advantages


Feature ESS.I.100215 Typical Competitors
Unbalanced Load Capacity 100% single-phase 50-70%
Grid Transition ≤20ms via STS module 50-100ms
Communication Interfaces 7 protocol options 2-3 protocols


Spread the love